Posted by Mary Broomfield | Home Renovation, House Projects

Installing a garage door can be a very simple procedure if you have the proper tools and some experience, at least with handiwork around your home. There are many different components to a garage door, and if you are taking out an existing one, this can also be a time-consuming process. Most people will choose to use a professional to help them install one simply because it’s easier to use a company that does this for a living. However, if you would like to save money and attempt to do this on your own, there are a few things that you need to know on how to install garage door, simple tips that can help you get this done.

 

Reasons To Install A New Garage Door

 

There are many reasons that people choose to put in a new garage door. For example, their existing one could be quite old and is no longer functioning as it once did. If it is not closing or opening all of the way, or if it is getting stuck, it is possible that you may need to replace the existing one that you have because it is simply too old to operate. You will want to take measurements of the garage door, the garage door opening, and then go to your local home improvement store to choose one that can be delivered. Once you have it, you will have to remove the existing garage door which is actually a very simple process.

 

Removing The Existing Garage Door

 

This can be difficult, and slightly dangerous, and almost always requires someone to help you remove it safely. You will need to remove the extension springs first, and is the initial step that must be done so that the tension on the springs is eliminated. This will require you to completely open the door, lock it into place using locking pliers, affixing it to each garage door track. You will then remove the cables, take off the springs, and released the pliers and move the garage door into the closed position. The torsion springs will then be removed, along with the winding bar, and then finally the tracks and the door. If there is an overhead motorized component, that will be the final step so that you can install the new garage door.

Capture3

Installing The New Garage Door

 

To install the new garage door, you are essentially doing the reverse of what was accomplished when you removed the existing door. You will want to assemble the garage door tracks, and then the rollers and existing brackets. You will need to fasten the hinges, and always use a power drill because it will be faster and allow you to firmly secure everything into the wood. Jamb brackets are added next, followed by actually installing the horizontal tracks and finally the garage door itself.

 

This basic overview of how to remove an existing garage door, and how to install garage door quickly, should give you a general idea of what needs to be done. The one that you purchase will have instructions, sometimes even including a link to a video that you can watch, so that you can follow the step-by-step procedure watching a professional do this job. However, if you would prefer using a professional to do this for you without having to worry about the dangers of working with extension and torsion springs, there is always going to be a garage door company in your area that can quickly remove an existing garage door, and replace it with a new one, for an affordable price.

Both comments and pings are currently closed.